BACK TO PHOTO GALLERY
All Models
Deep drawn manufacturing process and made in the USA. The extension rim protrudes from nailing flange 7/8" and total of eight 1/4" mounting holes (4 on each side). The sides are tapered to allow for nesting of multiple boxes and surface is clean of any oil residue and will adhere paint. The instruction sheet attached to rear panel. Now all models incorporate a Gas Port knock-out.

click image for high resolution
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18